Description
The gynecological chair KG-6-3 is intended for placing women on it during gynecological examinations, various procedures, as well as minor surgical interventions.
The frame of the chair is made of metal with an environmentally friendly polymer-powder coating that is resistant to repeated treatment with disinfectants used in medicine.
The chair stand and base are protected by decorative plastic casings.
Side rails for placing devices, as well as removable devices, are made of steel with a galvanized protective and decorative coating.
Pillows of the dorsal and pelvic sections are removable, attached to the frame by means of guide rods located on the lower plane of the pillow. Soft elements are made of polyurethane foam (thickness 50 mm) and covered with vinyl leather.
The knee pads are made of molded polyurethane foam in a removable hygienic vinyl leatherette cover. The knee pads are mounted on side rails and are adjustable in height and angle of inclination, followed by fixation with radial toothed clamps. The knee pads are equipped with straps that fix the shin.
The palm rests are made of steel tubes of round section with a polymer-powder coating. The hand rests are attached to the side rails with clamps and are adjustable in direction.
The basin (for collecting liquid) is made of stainless steel. The cassette for the basin is hung on the guide rails: it slides in when the patient is seated in the chair and slides out during the procedures. When changing the angle of the seat, the basin always remains in a horizontal position.
Control panel – manual or foot.
The chair is completed with the holder for paper towels located in the case of back section.
The base is mounted on 2 non-adjustable supports, 2 height-adjustable supports and 2 imported wheels with a diameter of 75 mm.
The chair is delivered assembled in a corrugated cardboard box and / or in a wooden crate.
Seat height adjustment is carried out using the 1st imported electromechanical drive:
– lower level, mm ………………………………………. ..650; – upper level, mm ………………………………………. .950.
Tilt angles are adjusted using 4 air springs:
– seats ………………………………………… ……………… from 0° to +15°; – backs ………………………………………… ……………………………. -15° to +70°. Standard equipment
- paper towel holder
- knee pads (2 pcs.)
- control panel (foot or hand)
- stainless steel basin
- palm rests (2 pcs.)
| Length (with a horizontal position of the back and seat), mm | 1340 |
| Seat width, mm | 590 |
| Seat height, mm | 650-950 |
| Height (total), mm | 1510-1810 |
| Product weight, kg | 100 |
| Gross weight (without crate), kg | 132 |
| Permissible load (no more), kg | 170 |
