Description
The OVEN PD100I sensor has an extended calibration interval (4-5 years) and is mainly designed to measure pressure as part of heat metering systems (heat meters, heat meters) in housing and communal services, as well as in systems that require extended calibration and warranty intervals: remote and hard-to-reach monitoring places in the oil and gas sector, testing and laboratory equipment.
A highly stable sensor is used in the pressure transducer OVEN PD100I with an output signal of 4…20 mA. To improve dust and moisture protection, the board of the normalizing converter is covered with a non-polymerizable compound.
The calibration interval is 5 years – for sensors with an error of 0.5% URL and 4 years – for sensors with an error of 0.25% URL. Accession to process – the union with a carving: M20×1,5, G1/2, G1/4.
Main characteristics
- Extended calibration interval:
- 5 years – for sensors with an error of 0.5% URL;
- 4 years – for sensors with an error of 0.25% URL.
- The upper limit of the measured pressure (URL) is from 0.016 to 4.0 MPa.
- Overload capacity – not less than 200% VPI.
- The normalizing converter board is coated with a non-polymerizable compound.
- Highly stable sensor is welded into the nozzle by laser welding
- Overall dimension in height – no more than 92 mm.
- Degree of protection of the body and electrical connector of the converter – IP65.
- Noise immunity meets the requirements for class A equipment according to GOST30804.6.2-2013.
