Description

Biochemical analyzer Stat Fax 1904

  • Compact biochemistry analyzer
  • Russified
  • Open system for all methods and reagents
  • Built-in printer
  • Built-in 12 well thermostat
  • Alphanumeric display
  • Full kinetics with reaction plotting
  • Automatic filter wheel (340, 405, 450, 505, 545, 600 nm)
  • Single or multi-point calibration
  • Non-volatile memory for 60 tests
  • Saving calibrationsMosquito flow cell
  • reduces reagent consumption by half
  • improves work productivity
  • not required for Stat Fax 1904+, used as an option
  • suction volume range: 250 – 500 µl
  • flow cell chamber volume: 33 µl
  • power supply: 12 V from the analyzer

    Specifications

    Measuring linearity range 0.00 – 2.50 optical density units (A)
    Photometer accuracy + (1 % of measurement + 0.005 A) at 0 – 1.5 A
    + (2 % of measurement + 0.005 A) at 1.5 – 2 A
    Stability zero drift no more than 0.005A for 8 hours
    Light source tungsten halogen lamp
    Filters (wavelengths) 340, 405, 450, 505, 545 and 600 nm
    Bandwidth at half height 10 nm
    Filter type interference
    Tube size 12 mm standard round
    Minimum volume 1 ml
    Max volume 2 ml (only for 37°C control)
    Temperature 37°С (+ 0.3°), incubation unit on permanently, measuring cell can be switched on/off
    Lamp warm-up time – in kinetic mode 120 s
    – with MosquitoT 240 s flow cell
    – in other modes 45 s
    Cell warm-up time 20 – 30 min, depending on ambient temperature
    Warm-up time of the incubation block 20 – 30 min, depending on ambient temperature
    Time to automatically turn off the lamp to save it after 15 minutes of inactivity, 30 minutes with MosquitoT
    Speed measurement, calculation and printing of results in 3 s
    Display alphanumeric, 16-digit, LCD
    Printer thermal, 20 characters per line, paper 57 mm
    Keyboard 16 membrane keys, 4×4, with a sound signal
    Calculation methods – single point calibration by standard or factor
    – multi-point calibration (up to 7)
    – kinetics by standard or factor (single or multiple)
    – by fixed time
    Required fuses 120V – 0.6A, 3Ag, slow burn
    Frame plastic painted with refractory enamel with metal base
    Power supply – 110-120 or 220-240 V, 50/60 Hz, selectable switching
    – Power consumption: less than 50 W
    – Fuses: two 0.5 A class T, 250 V
    Temperature, humidity 15 – 35°C, humidity less than 85%
    Dimensions, weight 24 x 34 x 10 cm, 4.5 kg

     

    Tests in progress

  • Enzymes: AST, ALT, gamma-GT, LDH, alpha-amylase, creatine kinase, creatine kinase MB-fraction, lipase, alkaline phosphatase, acid phosphatase, cholinesterase, HBDG, LAP, PGI
  • Substrates: uric acid, albumin, direct and total bilirubin, creatinine, glucose, hemoglobin, lactate, total protein, urinary microalbumin, urea, urinary and CSF protein, fructosamine
  • Lipids: cholesterol, HDL cholesterol, LDL cholesterol, triglycerides, phospholipids, total lipids
  • Electrolytes: potassium, sodium, calcium, chlorides, iron, TIBC, copper, magnesium, phosphorus, zinc
    Serum protein immunoturbidimetry: apolipoproteins A1, B, CII, CIII, E 1-acid glycoprotein, antithrombin III, ceruloplasmin, C-1-Esterase, complement C 3, complement C 4, haptoglobin, IgG, IgA, IgM, kappa (Ig light chains), lambda (Ig light chains), prealbumin, transferrin
  • Latex immunoturbidimetry of serum proteins: C-reactive protein (CRP), rheumatoid factor (RF), antistreptolysin O (ASLO), lipoprotein (a) LP(a), beta-2-microglobulin, ferritin, immunoglobulin E (IgE), myoglobin, microalbumin, alpha-fetoprotein, glycated hemoglobin