Multilevel grain sampler PZM-3-5-2m

Description

Sampler for grain multilevel PMZ-3-5-2m

The grain sampler is designed for sampling grain, flour and other bulk products in granaries, warehouses, vehicles, railway wagons, etc.

They are used at grain receiving and grain processing enterprises, enterprises of the feed industry, in the State Grain Inspectorate, and other agricultural organizations.

Samplers are manufactured in accordance with the requirements and GOST 13586.3-83 “Rules for acceptance and sampling methods”.

The samplers are easy to maintain, light in weight and robust in design. The probe consists of an outer and inner dural body with intake holes, handles with limiters, a tip.

The intake holes are at an angle of 9° relative to the axis of the sampler, which reduces the grain clamping area, the grains are not injured or broken.

Operating procedure:

1. Turn the handle counterclockwise to block the intake holes with dampers.
2. Immerse the sampler with closed flaps into the product embankment.
3. Open the intake holes by turning the handle clockwise.
4. Raise and lower the sampler several times in the embankment to speed up the entry of grain into it. Close the intake holes by smoothly turning the handle clockwise until it stops.
5. Remove the sampler from the embankment.
6. Then the sampler must be slowly turned over with the handle down, gradually pouring the sample through the hole in the end of the handle into the CCS.