Description

Titrator ПЭ-9210 is designed for fast and accurate determination of moisture content in a wide range of products and materials in liquid, gas or solid phase by coulometric titration. The titrator can be used in analytical and chemical-technological laboratories, in control and supervision bodies.
The device is most suitable for determining moisture in crude oil, heavy oil products, diesel fuel, transformer oil, etc. It can be applied in laboratory and industrial conditions.

The device is included in the State Register of Measuring Instruments of the Russian Federation under the number 55135-13

Main features:

  • Special design of the titration cell without diaphragm and platinum mesh greatly simplifies the cleaning and filling of the cell with electrolyte and significantly reduces its cost
  • Adaptive titration algorithm guarantees high accuracy when titrating samples with low moisture content
  • Color graphical touch display
  • Graphical presentation titration process
  • Built-in method for quick start
  • Creation and storage of user methods (up to 100 methods)
  • Storage of measurement results (up to 1000 series)
  • Accounting for reagent resource
  • Built-in magnetic stirrer
  • RS-232/485 port for connection scales and control of external devices
  • USB B port for connecting to a computer

Specifications:

  • Titration modes:
    • Coulometric titration of water
    • Determination of bromine number (index) according to ASTM D 1492;
  • Titration cell volume – 100 ml/150 ml, total volume 200 ml;
  • Generation of iodine in the cell – current pulses of fixed duration with amplitude up to 2000 mA;
  • Indication of the end point of titration – alternating-current polarization potential;
  • Determining the end point of the titration – relative drift, absolute drift or time;
  • Measurement range of water mass in the analyzed sample – from 0.01 to 200 mg;
  • Limit of permissible relative error – ± 3.0%;
  • The limit of permissible relative RMS of the random component of the error is 1.5%;
  • Sensitivity – 0.1 µg H2O;
  • Indication – drift, potential, titration time, mixing speed;
  • Calculations:
    • Automatic calculation of moisture content in ppm, %, mg, µg
    • Automatic calculation of bromine number or index in mg/100 g, g/100 g
    • Automatic drift compensation
    • Accounting for blank titration results
    • Statistical processing the results of measurement series;
  • Agitator – 100-1000 rpm, speed stabilization, step adjustment;
  • Power supply:
    • voltage: 198-242 Volts, 50 Hz;
    • power consumption: no more than 170 watts;
  • Overall dimensions:
    • height – no more than 200 mm;
    • length – no more than 350 mm;
    • width – no more than 275 mm;
  • Weight of the titrator – no more than 6.5 kg;
  • Service life – 10 years;
  • Mean time between failures – 10,000 hours.

Standard equipment:

  • Fischer Titrator – 1pc
  • Cell for titrator – 1pc
  • Silica gel – 100g
  • Dryer tube – 1pc
  • Anchor for built-in magnetic stirrer – 1pc
  • Connecting cables – 1 set
  • Power cable (with grounding) – 1pc
  • Needles (for syringe G21) 80 mm – 3 pcs
  • Fisher’s grease sealing – 1 pack
  • Septa – 50pcs
  • Operation manual with verification procedure – 1pc
  • Verification certificate – 1 piece